INFLUENCE OF SEWING SPEED AND OTHER PARAMETERS ON THE PRESSURE SETTING
##semicolon##
Keywords: Sewing speed, needle pressure, fabric type, thread thickness, seam quality, sewing parameters, optimization, textile engineering.Abstrak
Abstract: This study aims to gain insight into the influence of sewing speed and
other parameters on needle pressure during the sewing process. While needle pressure
has been shown to significantly influence seam quality and garment durability, there
is still much to be discovered about its dependence on sewing conditions. This study
aims to examine the relationship between sewing speed, fabric type, thread thickness
and needle pressure, with a view to establishing optimal pressure settings for different
materials and sewing situations. A series of experiments were conducted to test a
variety of combinations of sewing parameters, with the needle pressure measured using
a highly sensitive pressure sensor. The statistical analysis of the collected data
indicated that there were notable correlations between sewing speed and needle
pressure, with the pressure increasing in line with the speed. It was also found that the
fabric type and thread thickness had a notable effect on needle pressure, which
required adjustments to ensure optimal seam formation. This research offers some
valuable insights into the relationship between sewing parameters and needle
pressure. It also provides some practical recommendations for adjusting pressure
settings in order to achieve consistent and high-quality sewing results across a range
of fabric types and sewing speeds.
##submission.citations##
References
1. Lee, J. Y., & Chung, J. (2018). Effect of Sewing Speed on Seam Quality of Various
Fabric Types. Textile Research Journal, 88(10), 1184-1196.
2. Chen, X., & Gao, J. (2019). Adaptive Control of Presser Foot Force in High-Speed
Sewing Machines. Journal of the Textile Institute, 110(11), 1601-1610.
3. Kim, H. S., & Park, S. M. (2020). Optimization of Sewing Parameters for Improved
Seam Performance in Technical Textiles. Fibers and Polymers, 21(5), 1042-1051.
4. Wang, L., & Liu, Y. (2021). Machine Learning Approach for Real-Time
Adjustment of Sewing Machine Parameters. Textile Research Journal, 91(15-16),
1728-1740.
5. Sharma, R., & Gupta, D. (2022). Influence of Sewing Speed and Presser Foot
Pressure on Seam Pucker in Knitted Fabrics. Journal of Engineered Fibers and
Fabrics, 17, 1-12.
